Biotage® ACT (Anti Cross Talk) Plate Adapter is a novel (patent pending) solution to the phenomenon of hot spot cross contamination, or cross talk, during evaporation.
Extrahera™ is a powerful, user friendly automation system for Supported Liquid Extraction (SLE), Solid Phase Extraction (SPE), Phospholipid Depletion (PLD) and Protein Precipitation (PPT) based methods, in plate or column formats.
For the efficient automation of oil and grease extraction, EPA Method 1664, the Biotage® Solvent Recovery OG attaches quickly and easily to the exhaust hose from the SpeedVap® Solvent evaporation system.
The Biotage® Solvent Recovery SVOC is designed to condense and collect solvent vapors which are generated when using the DryVap® concentration system.
Designed for high throughput laboratories, the Biotage® SPE Dry 96 and Biotage® SPE Dry 96 Dual Sample Concentrator Systems provide efficient solvent evaporation in microplate format and are compatible with 24-, 96- and 384-well collection plates. Heated gas flow from above and below the collection plate ensures efficient solvent evaporation.
Biotage® V-10 Touch rapidly dries samples dissolved in both aqueous and organic solvents. It easily evaporates HPLC fractions from purification, high boiling point solvents from synthesis and features a novel dry-down onto silica technique for easier dry load capabilities prior to purification.
DryDisk Separation Membranes eliminate the problems inherent with chemical drying such as retention of water-soluable compounds, over-saturation, clogging, oven drying, and contamination.
The DryVap® Concentrator System automates the drying, evaporation, and concentration of organic solvent extracts prior to chromatographic analysis, combining what were once manual steps into one automated process.
Isolera™ Dalton is the most advanced and innovative flash purification system available, designed by people who understand flash chromatography for the chemists who need it. "Pure convenience! Just pure convenience! It lets us perform purification and analysis at the same time. It gives us tremendous power to isolate unknown compounds.” - Hiroki Nishii, Chugai Pharmaceutical’s Kamakura Research Laboratories
Isolera™ Prime is a value based system which recommends appropriate cartridges and calculates the best solvent conditions and gradients for your purifications. It has solvent pumps, automated fraction collection as standard and delivers much more than just the basics. Solvent use is minimized and advanced compound detection makes sure that your purified compound is delivered at the end of the run. We belive in providing value, so Isolera Prime systems embrace ACI™, a revolutionary advancement, converting regular flash from simple purification to the fastest, greenest, and most economical way to reliably isolate pure compounds for organic synthesis. ACI offerred as standard on Isolera Prime.
Isolera™ Spektra is a high performance ACI™ Accelerated Chromatographic Isolation system. Available as Isolera Spektra One, Four and LS, with time, efficiency and cost saving purification run features that are normally only found on the world’s most expensive high-end chromatography systems. With Isolera™ Assist you get the benefits of the feature-rich Isolera Flash Purification Systems in a simple and easy to use interface. It ensures you achieve the best results, regardless of your experience level.
ISOLUTE® 101 is a non-polar polymeric (PS-DVB) phase for extraction of polar analytes from aqueous samples.
A range of accessories for columns and plates including empty columns and frits, column caps, adapters, stopcocks and filtration products used in bioanalysis and general analytical applications.
ISOLUTE® ALUMINA (acidic, neutral and basic) are polar sorbents commonly used to isolate compounds from non-polar solvent extracts.
ISOLUTE® C18 is a retentive, non-polar sorbent for extraction of a range of analytes from aqueous samples using a non-polar retention mechanism.
ISOLUTE C18(EC) is a retentive, non-polar sorbent for extraction of a range of analytes from aqueous samples using a non-polar retention mechanism.
ISOLUTE® C2 is a weakly non-polar sorbent for extraction of non-polar acidic, neutral and basic analytes from aqueous samples using a non-polar retention mechanism.
ISOLUTE® C2(EC) is a weakly retentive, non-polar sorbent for extraction of a range of analytes from aqueous samples using a non-polar retention mechanism.
ISOLUTE® C4 is a non-polar sorbent for extraction of a range of analytes from aqueous samples using a non-polar retention mechanism.